Home >>> Motorcycles Replacements >>> Batteries Recharges

BATTERIES RECHARGES

The wide range of LP charges is specifically designed to better adapt to the different cycles of charge and the timing required by each type of battery.

To direct the end user to choose the product that best suits your needs, LP has selected for you a complete set of charging equipment, specially made to better adapt to the technology that comes with the single accumulator.

The use of the unit ensures maximum performance not only of the charging device, but also the battery under the scheme.
It is important to know that the basis of best performance guaranteed for each product, there is first of all the respect of time required for each battery in order to restore its initial energy. Precisely for this fact it is essential to follow the instructions of charging instructions for each battery and for each type of the charging device.

It is also noted that despite the batteries of the range LP can be subjected to a brief charge cycle , it is however recommended to resort to this type of operation only in case of emergency .
In addition to extending the intervals between one cycle of charge and the other , the correct use of the charging equipment makes it possible to not only prolong the duration of the charge re-established , but life itself of the accumulator.

All devices in range extender LP are equipped with the most important safety devices , which ensure the protection of the end user and contribute to maximum cooling performance of each device .

The letters " OCP " for example , indicates that the charger is equipped with the " extra - current protection device " , useful to prevent the risk of excess supply in the charger and the possible consequences on the battery under charger cycle.

"IP65" is the acronym that attests the strength of the unit charge to exposure to rain and moisture.

The devices are also equipped with:

Protection system against short circuit.
Protection system for polarity reversal: in the case where the battery poles are incorrectly connected to cables / eyelets / pliers prepared, such a device avoids that the battery is damaged, thus preventing the risk of possible leakage of gas.
System of anti-overheating of the charging during the charging process or maintenance charging of the battery.
System of anti-dissipation of energy: charging or maintenance charging, the energy produced by the device is conveyed into the battery, avoiding the dispersion into thermal energy.

The entire range of products for the batteries including charger 2in1-A battery charge, both universal and specific for each type of battery, such as the battery charger and charge maintainer automatic PC SPI3.

Thanks to modern technology which is available, is able to adapt perfectly to all types of 12V batteries and is particularly suitable for applications with lithium technology LiFePo4 proposed by extraordinary choice offered by LP.

Optimizers charge with diagnostic system that allows a safe and precise control of the real state of charge of the battery, suitable for any type of technology for the construction of the battery.

The range is complete with automatic loaders and plug-in devices 4 charging cycles and the brand new booster with LiFePo4 lithium technology, more innovative and more effective.

And if you are still not satisfied, you know that the charging devices LPs do not stop in the world of cycling: in fact many models are also suitable for charging batteries in the auto industry, recreational vehicles, ATV, boat, snowmobile and water scooter.