Home >>> Motorcycles Replacements >>> Traditional LP Batteries >>> Batteries LP GEL

BATTERIES LP GEL

All batteries of the line LP gels are made according to the dictates of modern "technology GEL": the only able to generate the inrush current capacity starter such as to be particularly suitable for applications from the cue absolute highest.

This is the case of marked bike HARLEY DAVIDSON, LP which has decided to devote an entire product line to GEL technology, targeted to meet the important needs of this type of engines.

All Lp batteries GEL line are completely sealed and benefit from 100% of the revolutionary "maintenance free", "NO NEED FOR MAINTENANCE". Batteries LP line GEL not require periodic monitoring of electrolyte level and do not need to add liquid.

The commitment invested by LP in the field of research and development has led to the conception of a product capable of reducing to a minimum the natural process of self-discharge, touching a minimum threshold of 5% per month.

The attention in the choice of the strongest materials capable of constituting the outer casing of the product, enables GEL batteries have a high capacity of resistance to strong vibrations produced by the powerful engines that power and which are particularly stressed. The full range of batteries GEL LP covers all relevant applications from 4 Ah to 30Ah.

WHAT YOU SHOULD KNOW WHEN USING GEL BATTERIES?

To recharge the GEL Landport batteries you must follow the instructions below:

If hibernation:

  • if the battery is installed, you must first disconnect the connection cables to prevent any flow of current
  • if the battery is installed, you must store it in a dry and isolated, away from sources of light and at a temperature between 0 ° C and 10 ° C: in doing so, you will reduce the risk of self-discharge of the battery
  • It is recommended to save your battery GEL in full state of charge: Once folded, it can hold a charge for more than 6 months.
  • Before using a battery in use for more than 6 months, it is recommended to carry out the full charge
  • Method of charge: the charge current must be equal to 1/10 of the capacity of the battery being charged; for example, a battery of 12Ah must pay a charge current of 1.2 Ampere.
    And 'strongly it recommended the use of the recommended battery chargers.
  • If the charge current exceeds the proportion of 10% of the battery capacity (approximately 15 volts) or if you do not record the flow of current, the battery can not be charged.
  • During the charging process, the electrolysis phenomenon can lead to leakage of gas is highly explosive oxyhydrogen.

    IT IS STRICTLY FORBIDDEN TURN LIGHTS AND / OR FIRES. IT IS STRICTLY FORBIDDEN TO SMOKE in the surrounding environment. DO NOT CHARGING IN PRESENCE OF SOURCES OF LIGHT AND / OR HEAT . NOT CAUSE SPARKS .

    It is important to know that the battery terminals should not be eliminated , even during the charging process. To check the state of charge of the battery, it is sufficient to use a voltmeter to measure the voltage .
    It is recommended not to use the battery for at least 12 hours before recharging .
    Beyond 6 months after you stop using the battery , you must make the charge respecting the charging process and the time required by a single specific , essential to the success of the operation and safely .
    It is recommended to recharge the device using the constant current specification for each battery .

    UNLESS AN EMERGENCY , DO NOT SEEK THE PROCEDURE CHARGE FAST